The colour band around the top of an extinguisher tells you what is inside it, and what is inside it decides what it can safely be used on. Get it wrong and the best case is that nothing happens. The worst case is a kitchen fire that gets thrown across the room, or a jet of conductive agent into live equipment.
Here is the whole range in plain terms, and then how you work out what a particular building needs.
ABE dry chemical, the white-banded one
The general-purpose unit, and the one most Australian businesses have most of. ABE powder handles Class A (wood, paper, textiles), Class B (flammable liquids like petrol, oils and solvents) and Class E (energised electrical equipment), which covers the majority of what is likely to burn in an office, a shop, a workshop or a warehouse.
Its weakness is the mess. Discharging ABE powder into a server room or a commercial kitchen creates a mildly corrosive dust that gets into everything and often costs more to clean up than the fire did. It is also poor on deep-seated fires in bulk materials, because the powder knocks down the flame without necessarily cooling what is underneath, so it can reignite.
CO2, the black-banded one
Carbon dioxide displaces oxygen and leaves nothing behind. That makes it the unit for switchboards, server racks, laboratory equipment and anything electrical you do not want to write off. It is effective on Class B and Class E and it does no secondary damage.
Two cautions. The horn gets extremely cold in use, so it is held by the handle, not the horn. And in a small enclosed room CO2 will reduce the oxygen for the person using it as well as for the fire, so you discharge and get out.
Wet chemical, the oatmeal-banded one
The kitchen unit, and the only correct answer for a Class F fire, which is cooking oil and fat. Wet chemical works by saponifying the burning oil, turning the surface into a soapy layer that seals it and stops it reigniting off its own heat.
This is the one that matters most, because it is the one people most often do not have. A commercial deep fryer that catches will not be put out for long by an ABE unit, and the powder discharge can splash burning oil out of the vat. If you cook with oil at volume, you need wet chemical within reach of the cooking line, along with a fire blanket. Read our page on fire safety in hospitality for how this looks in a working kitchen.
Foam, the blue-banded one
Foam blankets the surface of a flammable liquid and stops the vapour getting to the air. It suits Class A and Class B, and it is the sensible choice where there are quantities of fuel, solvent or oil, so workshops, plant rooms, fuel stores and rural sheds. Foam conducts, so it is not used on live electrical equipment.
Water, the plain red one
Water is for Class A only: paper, cardboard, timber, fabric, general combustibles. It cools, so it is good at killing off deep-seated fires that powder only knocks down. It must never be used on flammable liquids, cooking oils or anything electrical.
What must never be used on what
- Water on live electrical or on any burning liquid or oil.
- Foam on live electrical equipment.
- ABE powder as the primary unit on a deep fryer, and preferably not in a server room or a food-preparation area.
- Any extinguisher on a fire that is already bigger than the extinguisher. Get people out and call 000.
Fire blankets
Not an extinguisher, but part of the same conversation. A blanket smothers a small contained fire, most usefully a pan on a stove, and it can also be used on clothing. Every kitchen and every tea room should have one, mounted where someone can reach it without leaning over the stove.
How many do you need, and where do they go?
This is where it stops being a shopping list and becomes a design question. The number, size, type and placement of portable extinguishers in a building is worked out against the classes of risk present and the travel distance a person would have to cover to reach one. The principle is simple: from anywhere someone might have to fight a fire, they should reach the right kind of extinguisher quickly, without passing the fire to get to it.
In practice that means:
- Units go on the exit path, not in the far corner of the room, so reaching one moves you toward the way out.
- They are mounted and signed, at a height a person can lift them from, with the location sign visible above the shelving line.
- The type matches the risk beside it. CO2 at the switchboard, wet chemical at the cooking line, foam near the fuel store, ABE for the general floor.
- Nothing is stored in front of them. This is the most common finding at audit and it costs nothing to fix.
We walk the premises, look at what is actually in each area, and specify what goes where and why. Then it is supplied, installed, tagged and put on a service schedule. See the extinguisher service or get a quote.
Buying online is usually a false economy
You can buy an extinguisher cheaper than we will install one. What you cannot buy is the part that makes it count: the unit being the right type for what it is standing next to, mounted and signed correctly, listed on the building's asset register, and on a six-monthly schedule so it stays compliant. An uncertified unit bought online and hung on a nail does not help you at audit, and it will not help the person who reaches for it either.
Written from the workshop at 96-98 Grafton Street, Warwick. General information only, not a substitute for advice on your own building. For a straight answer on your premises, give us a call.
All fire safety advice